FDA: Guidance Drug Safety Information and Communications to the Public

As explained in the Food and Drug Administration’s (FDA) mission statement, it is FDA’s responsibility to (1) promote the public health by promptly and efficiently reviewing clinical research and taking appropriate action on the marketing of regulated products in a timely manner, and (2) protect the public health by ensuring that human drugs are safe and effective. 

To fulfill those goals, before drugs can be marketed, the Center for Drug Evaluation and Research (CDER) rigorously evaluates new drug applications (NDAs) and biologics license applications (BLAs) to ensure that the benefits of the drugs exceed the risks for their intended use.  In recent years, CDER has begun making information on potential drug risks available to the public earlier — often while the Center is evaluating safety data and determining whether any regulatory action is warranted. 

FDA monitors and reviews safety information about a drug throughout the product’s lifecycle, interacting with sponsors during product development and clinical investigation of the drug, closely reviewing safety issues during consideration of a marketing application, and, if the drug is approved, monitoring safety reports after the drug is marketed. Every approved drug has labeling (e.g., prescribing information) that contains, among other things, information about the benefits and risks of using the drug. Because all drugs have risks, health care professionals and patients must balance the risks and benefits of a drug when making decisions about drug therapy. 

From approval through post-marketing, CDER provides information about drug risks and benefits to health care professionals and patients, especially when that information has generated a specific concern.  Recent guidance from the Agency outlines how CDER develops and disseminates drug safety information, and classifies drug safety issues.  These draft guidance reflect the Agency’s current thinking about reviewing and communicating potential post-marketing drug safety issues and how FDA prioritizes identified safety issues according to an established set of criteria. 

The guidance entitled, Drug Safety Information — FDA’s Communication to the Public, describes how CDER develops and disseminates messages about important drug safety issues, including emerging drug safety information.  An important drug safety issue has the potential to alter the benefit–risk analysis for a drug that can affect decisions about prescribing or taking the drug.  For example, additional adverse drug reactions, some of them serious, may be identified once a drug is used more widely and under more diverse conditions (e.g., concurrent use with other drugs), or when the drug is prescribed for off-label uses. In some cases, medication errors can occur because of name confusion or other factors that influence safe use of the medication. 

FDA has developed effective and ongoing relationships with a wide array of trade and professional associations, patient advocacy and consumer groups, safety organizations, the media, and other entities.  When drug safety issues arise, the Agency reaches out to these groups.  In addition to written communications, FDA uses webinars, broadcasts, conference calls and its web site to get out the news. 

After drug approval, FDA may learn of new, more serious, or more frequent adverse drug reactions from, for example, postapproval voluntary or mandatory reporting of adverse drug reactions during use of the drug; postapproval clinical trials exploring new uses of the drug; or other postapproval studies, including epidemiologic studies or active surveillance evaluations.  

CDER integrates what is learned from required sponsor reporting and its own evaluations into an overall system of postmarketing surveillance and risk assessment both to identify safety issues that were not identified during the clinical development program and to learn more about issues that may have occurred but were difficult to interpret.  The Center uses this information to take appropriate action when the risks indicate a need to provide additional safety information to the public, to update drug labeling, to require postmarketing studies or trials, to require additional risk management interventions, or, on rare occasions, to remove a drug from the market. 

Similar to the predictability and accountability to the new drug review process brought by the Prescription Drug User Fee Act (PDUFA) of 1992 and its reauthorizations, CDER has recently begun to apply a similar approach to managing postmarketing safety. This is in part a response to a number of studies of CDER’s postmarketing activities that raised concerns about the predictability and timeliness of the Center’s regulatory decision-making after postmarketing safety issues were identified. 

In January 2007, CDER took an important step forward when it launched the Document Archiving, Reporting, and Regulatory Tracking System (DARRTS) module for centralized tracking of significant postmarketing safety issues.  This system enables CDER to share information, including project plans, document reviews, and recommendations for regulatory action, across multiple offices. 

Significant postmarketing safety issues include serious adverse events, product quality issues, and medication errors.  CDER receives a constant flow of information about potential drug safety issues.  The seriousness of reported problems varies widely. Those that are determined to be significant safety issues are tracked in DARRTS.  To be considered significant, the problem or adverse event must meet certain criteria. In general, postmarketing safety issues are significant and will be tracked by the Center if they have the potential to lead to: 

  • withdrawal of FDA approval of a drug
  • withdrawal of an approved indication
  • limitations on a use in a specific population or subpopulation
  • additions or modifications to the Warnings and Precautions, or Contraindications
  • sections of the labeling, or the Medication Guide or other required patient package insert
  • establishment of or changes to the proprietary name/container label/labeling/packaging to reduce the likelihood of medication errors
  • establishment or modification of a risk evaluation and mitigation strategy
  • a requirement that a sponsor conduct a safety-related postmarketing trial or
  • study the conduct of a safety-related observational epidemiological study by FDA 

When CDER staff consider a safety issue to be significant, according to the threshold criteria listed above, a DARRTS tracked safety issue (TSI) is opened. Typically, an interdisciplinary team assesses the safety issue, re-evaluates the risk–benefit profile of the drug, and determines the need for regulatory action. 

The Next Step — A Framework for Prioritizing TSIs  

Since the introduction of the DARRTS safety tracking function, almost 1,000 TSIs have been entered into the system.  Although all of these issues are considered significant, all 1,000 TSIs are not, in fact, of the same urgency.  Without sufficient resources to manage all TSIs equally, FDA has been prioritizing them on a case-by-case basis, but without an agreed-to priority framework.   

The Center is now seeking to establish a formal framework for prioritizing TSIs so that CDER can direct resources more effectively toward those issues posing the greatest potential risk to patients.  This framework will classify TSIs as priority, standard, or emergency.  Those deemed to be priority or emergency will be most closely monitored, tracked, and managed with clear timelines for decision-making. 

The use of a formal framework is intended to ensure that staff working in different offices across CDER have a common understanding of the relative urgency of TSIs and direct attention to those that need to be addressed most expeditiously.  The framework will also inform CDER decisions about public drug safety communications so that health care professionals and patients receive timely information about safety risks with the greatest public health significance. 

Prioritization — Part of an Evaluation Process  

Identifying and prioritizing postmarketing safety signals are only the first steps in evaluating a suspected safety problem.  Once identified, the analysis of the possible safety issue requires identifying all sources of pertinent data and analyzing them, weighing findings against the established benefits of the drug, and deciding on the appropriate steps for dealing with the identified problem.  This guidance addresses only the factors to be used to prioritize a newly identified safety issue.  The evaluation of the issue, weighing benefits and risks, and optimizing risk mitigation or risk management activities will not be addressed here, but are the subject of additional ongoing Agency work. 

Once an issue has been prioritized, CDER staff will promptly develop and implement a plan to fully evaluate the risk and take appropriate actions.  Initial activities may range from analysis of existing data to requests for more data from the drug’s sponsor. Differences in evaluation needs will determine how soon regulatory action can be taken, but, especially for priority issues, there will be a prompt and continuous effort to ensure that the appropriate steps are taken expeditiously.

Once CDER reaches a conclusion about the safety issue and decides to take action, the action may include, for example, requiring changes to the drug’s labeling, requiring additional risk management interventions such as a risk evaluation and mitigation strategy (REMS), requesting voluntary withdrawal, or initiating proceedings to withdraw approval of the application resulting in removal of the product from the market. 

CDER makes decisions about the appropriate regulatory action only after balancing the potential risks posed by the drug against the magnitude and nature of established clinical benefits, the uniqueness of those benefits (i.e., whether there are alternative treatments with similar benefits), and the severity of the disease or condition the drug is used to treat in the context of the populations the drug is intended to treat. 

The Hazard Assessment  

CDER will use hazard assessment criteria and will then apply certain modulating factors to classify a newly identified safety issue.  CDER staff will first apply the criteria used to estimate the hazard that the suspected safety problem poses to patients.  This will yield a preliminary classification of either priority or standard.  Staff will then examine the issue in relation to the context of the drug’s use, biological plausibility, and other factors. Based on this examination, staff may modify the preliminary classification.  When the safety issue does not appear to fall clearly into either the priority or standard class, CDER will err on the side of caution and classify it as a priority issue. 

The Center may consider selected priority safety issues to be emergencies, particularly if they have involved fatalities, have the potential to affect a very large number of patients, and if lives can be saved or if serious harm can be prevented by prompt action. Emergency issues will be immediately elevated to the attention of senior management. All tracked safety issues (TSIs) not classified as priority or emergency following this approach will be considered standard

The criteria for determining whether a postmarketing safety issue is significant for tracking purposes are essentially surrogates for the seriousness of the issue.  By and large, a TSI will meet the regulatory definition of a serious adverse drug experience (21 CFR 314.80(a)), and for any TSI, there will be credible evidence at the time the issue is initially tracked that the significant safety issue could be associated with the drug. 

Once this threshold is met, CDER will estimate the hazard posed by a significant tracked safety issue, based on three variables: (1) the relative seriousness of the issue; (2) the estimated size of the population exposed to the risk of the drug; and (3) the suspected frequency of harm to patients exposed to the drug.  The combination of factors 2 and 3 provides an estimate of population risk; the combination of factors 1 and 3 provides an estimate of personal risk to the patient. 

1. Relative Seriousness of the Safety Issue.   

CDER will determine the relative seriousness of a safety issue as high or medium. In general, the seriousness will be considered to be high if the risk is fatal, life-threatening, or requires hospitalization. Examples of adverse medical events considered highly serious include, for example, acute myocardial infarction, stroke, acute renal failure, acute hepatic injury, progressive multifocal leukoencephalopathy, anaphylaxis, and toxic epidermal necrolysis. Most likely, a safety issue considered highly serious would be classified as a priority TSI. A serious safety issue that does not involve fatal or life­ threatening risks would be considered to be of medium relative seriousness and would  depend on a large exposure and/or high relative risk to be considered a priority TSI. 

2. Estimated Size of the U.S. Population Exposed to Risk of the Drug  

CDER will consider the rate of patient exposure to be high if over 1 million patients use the drug.  A recent CDER analysis of almost 2,200 active ingredients sold through U.S. retail pharmacies shows a nearly bimodal distribution of patient exposure.5 A very small percentage (3%) were used by more than 5 million outpatients within the past year, and only 11% were used by more than 1 million. In contrast, 86% were used by fewer than 500,000 outpatients.  This analysis did not include drugs distributed through inpatient care settings, such as hospitals, or address the length of patient exposure to the drugs.  

However, the numbers are sufficiently compelling to suggest that drugs with very high levels of patient exposure are uncommon.  CDER reviewers will therefore rate the magnitude of patient exposure as high in a relatively small fraction of cases.   

3. Suspected Frequency of Harm to Patients Exposed to Risk from the Drug 

Available information regarding frequency of harm will be taken into account along with the context in which the drug is being used (see Modulating Factors). For example, if the risk of concern is a common event in the United States, such as stroke or myocardial infarction, a small increase in risk (e.g., 20%) could be a reason for elevating the status of the TSI to priority because even a small increase in risk could affect a large number of patients. In contrast, if the risk of concern is not common, a small increase in risk might not be a reason to elevate the status of a TSI to priority

The estimate of harm will be refined as more data become available. In general, for the purpose of classification of a TSI, CDER staff will use a conservative approach to risk estimates — a high end estimate in the face of variable data. For example, frequency estimates will often include both a point estimate and a measure of variance. For the purpose of classification, when there is a reasonable amount of data, the upper bound of the confidence interval would be used to estimate risk. 

When CDER staff identify a new safety issue, unless the information is derived from a clinical trial or pharmacoepidemiology study, precise and reliable information may be lacking about the frequency of the adverse event or the increase in risk posed to patients exposed to the drug. If such information is lacking, staff will use the existing information on seriousness, and size of the population at risk, and then the modulating factors to classify the TSI.

Modulating Factors  

After assessing the hazard posed by the safety issue, based on the three factors discussed above, CDER staff may consider a range of other factors that have the potential to elevate or, in some circumstances, lower the classification of the safety issue.  These factors tend to fall into three broad categories. 

1. Context of the Drug’s Use  

The availability and risk profiles of therapeutic alternatives.  Whether the drug provides unique clinical benefits, or whether there are other drugs with the same indication that are considered relatively safe and thus offer robust alternatives to patients, will be considered as a modulating factor. A suspected serious safety issue for a drug with several safe alternatives would more likely be classified as priority than a safety issue for a drug providing unique benefits. 

Risks posed to vulnerable populations.  CDER is mindful of risks posed to certain vulnerable populations, such as pediatric patients, older patients, and pregnant women. Evidence that a drug poses a risk to such populations would more likely weigh in favor of making the safety issue a priority 

The clinical setting in which the drug is used.  Occurrence of a serious risk in an unsupervised setting is likely to raise the level of CDER concern and make the safety issue a priority. For example, CDER would consider whether the safety issue occurs with an OTC medication whose use is widespread and medically unsupervised, or whether it is used in a hospital or other supervised care setting. 

 2. The Quality of the Data Suggesting the Risk  

Spontaneous adverse event reports and published analyses differ greatly, for example, in their quality, the methodology used, the reported strength of the findings, and whether the findings are replicated. For published reports, the quantity of data presented may be highly variable and the underlying data may or may not be available for review. The overall credibility of a safety finding is an important modulating factor for determining its classification. The higher the credibility of the data, the more likely it will be considered a priority TSI. 

3. Biologic Plausibility   

CDER will consider whether there is a biologically plausible explanation for the association of the drug and the safety signal, based on what is known from systems biology and the drug’s pharmacology. The more biologically plausible a risk is, the greater consideration will be made to classifying a safety issue as a priority. 

NEXT STEPS

CDER invites public comment on the proposed approach and criteria to be used for classifying TSIs as priority, standard, or emergency.  After analyzing the comments, the Center will consider whether to modify its approach to classifying significant safety issues and will finalize this guidance. 

Within the next year, CDER will begin implementing this framework to ensure that priority safety issues, including emergency safety issues, receive rapid attention.  Unlike reviews of premarket applications, which typically contain all or most of the data needed for regulatory decision making, postmarketing safety reviews often begin when data are sparse or inadequate for regulatory decision making.  For this reason, resolution of postmarketing safety issues does not lend itself to completion within fixed time frames. 

Despite this inherent difficulty, CDER will make operational changes to shorten the time needed to assess and act on priority safety issues. Roles and responsibilities will be clarified so that there is a clear path to decision making. After pilot testing this system, the Center intends to develop specific milestones for taking action on priority and standard TSIs, similar to those now used for premarket applications. 

Under the new system, whenever a new priority safety issue is identified, review teams will develop work plans incorporating these milestones and the issues will be managed in accordance with the work plans.

NEW
Comments (0)
Add Comment